Musical notation. About musical notation
Musical notation is an ordered set of musical notation symbols designed to convey some musical material in writing. Musical notation - a system of graphic characters used to record music.…

Continue reading →

What is an equalizer? The use of equalizers
Equalizer (English equalize - “equalize”, the general abbreviation is “EQ”), a timbre block is a device or computer program that allows you to increase or decrease the volume of individual…

Continue reading →

Cakewalk: working with a stave. About working with the stave at Cakewalk
In Cakewalk, the Staff instrument is one of the most convenient and important means of creating a melody. For musicians using classical musical notes, guitarists who are accustomed to the…

Continue reading →

frequency bands

I draw music

While listening to a piece of music, focus and try to “see” what the music portrays. If this, for example, is “The Seasons” by P. Tchaikovsky, then you may see an autumn landscape, a flying three, an awakening nature, a lark ringing in the sky. When listening to a song, one can always “finish” in the imagination what is more suitable for it: the wide expanse of the landscape, festivities …

Music, like any art, conveys the thoughts of the person who created it, the thoughts and feelings of those whom it depicts (in song, dance, opera, symphony). Compare the sounds in the music with the colors in the painting or the melody with the lines in the picture. And to make it even more interesting, draw what you Continue reading

Acoustics Studios

To describe sound fields in acoustics, the sound pressure p, measured in Pascals (Pa), is widely used. As with electrical quantities in sound engineering, it is usually more convenient to use a logarithmic scale here. At the same time, the concept of sound pressure level (SPL) is introduced L = 20 log (p / p0), where p0 = 2 x 10-5 Pa is the sound pressure at the threshold of audibility. Very often, ultrasound is measured (or calculated) in separate frequency bands. The most widespread are octave or 1/3 octave bands with a relatively constant bandwidth. Geometrical average (below in the text for brevity, average) frequencies of these bands are regulated by international and domestic standards. A preferred range of mid frequencies for octave bands: … 125, 250, 500, … Hz; for 1/3 octave bands: … 125, 160,200, 250, … Hz. In addition to these narrow frequency bands, broadband correction is also applied, the form of which is Continue reading

About mechanical sound recording
A mechanical sound recording is based on cutting (or extruding) grooves in the material of a recording medium using a sound recording device — a recorder. When playing along the…

...

Revitalizing MIDI Drums
Many may rightly argue that the great advantage of sampled, electronic drums is that they don’t force you to use ‘realistic’ rhythmic patterns or drum sounds. Most dance music, for…

...

Memo to the musician: frequencies. Frequencies to Remember
Classically, the sound spectrum is divided into three parts: low, medium and high frequencies. The frequency limits, although not everyone agrees with this, can be denoted as follows: low from…

...

What is an equalizer? The use of equalizers
Equalizer (English equalize - “equalize”, the general abbreviation is “EQ”), a timbre block is a device or computer program that allows you to increase or decrease the volume of individual…

...